Siemens Nigeria Job Recruitment (3 Positions)

Siemens Nigeria Job Recruitment (3 Positions)

sms


Siemens, is an Integrated Technology Company. The business activities of our Energy, Health care, Industry and Infrastructure & Cities Sectors have enabled us to capture leading market and technology positions worldwide. Technological excellence, innovation, quality, reliability and international focus have been our hallmarks for 165 years, making us strong and linking us to our shareholders, employees and customers as a partner of trust.

We are recruiting to fill the following positions below:

1. Job
Title: Field Service Engineer – Gas Turbine Mechanical (Service Engineer)

Ref. ID:  123829
Location: Port Harcourt, Rivers
Job Type: Full-time
Job Family: Customer Services
Experience Level: Experienced Professional

Position Objective

  • This position serves as a
    company technical and administrative representative, resident engineer and
    deals with customer service assignment including on-site preventive
    maintenance and inspection service work, call-out services and
    commissioning activities on Gas Turbines products line and packages.
Mission
  • Under general direction and
    instructions, independently determines and develops approaches to
    solutions to customer requirements and problems.
  • Health, Safety and Environmental:
    Understands and complies with Siemens and customer safety policies and
    procedures. Ensure the work permit system is complied with. Ensure safe
    site and practices. Participate by attending general safety and toolbox
    safety meetings. Suggest safety improvements.
  • Quality: Ensure customer
    expectations are met or exceeded. Ensure all maintenance activities are
    carried out in accordance with company policy, manufacturer’s
    recommendations and good practices.
  • Analyzing: Must have basic
    knowledge of methods and experience in the categories of maintenance on
    the products and various equipment associated with primary package.
  • Project Monitoring: Must be
    able to recognize abnormal sounds vibrations and potential safety problems
    at inception and take appropriate action to prevent a serious safety
    hazard that could develop to equipment damage or loss of production.
    Provide timely and daily reports to the relevant manager on on-going
    projects or daily work. Keep abreast of pending work and personnel
    required to complete the projects. Ensure that necessary parts are
    available and submit materials requisitions when required.
  • Reporting: Accurate feedback
    and communication to pre-planned report format. Keep and update all
    equipment histories to effectively forecast equipment utilization and
    efficiency. Co-ordinate any changes necessary to ensure operations are
    efficient and minimal downtime is required. Ensure effective communication
    and reporting to immediate supervision and if applicable to customer
    representatives.
  • Problems: Will utilize sound
    judgment when analyzing problems. Solve problems with little or no
    supervision in a timely manner and at a nominal cost. Master all
    procedures and available options of identifying sources of information and
    technical advice. Will have enough product knowledge to repair and adjust
    minor mechanical/electrical components/systems and will be capable of
    reading applicable drawings and technical manuals.
  • Scheduling: Provide short to
    medium term scheduling of personnel and materials required for smooth
    routine maintenance and commissioning of plant.
  • Timing: Adequate strategy of
    engaging operations in releasing equipment in a timely manner for
    maintenance. Will be, required to assist in a technical manner with the
    operations and maintenance crew in any area if the workload exceeds the
    number of personnel available.
Principal
Accountabilities:
  • Monitor maintenance services or
    installation support to ensure they are carried out within company policy,
    manufacturers’ recommendations and in a safe manner
  • Ensure major interventions are
    planned, executed on schedule and within commercial orders.
Qualifications
  • Will have served on recognized
    gas turbine product lines and/or having long period of continuous
    occupation as gas turbines controls/mechanical engineer.
  • Will possess a technical
    qualification e.g. Engineering Degree, preferably in Mechanical
    Engineering.
  • Will have 7-years and above
    working experience in a related industry. Higher experience/skill levels
    may balance lower academic qualifications, and visa versa.
  • Experience in an
    onshore/offshore environment is essential.
  • Strong rotating equipment
    background will be an asset.
  • Familiarity with Gas Turbine
    engine theory, packages systems  and operation will be an asset.
  • Will hold and maintain a full
    offshore medical and survival certificate to suit all areas of assignment.
Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click
here to apply online


2. Job
Title: Field Service Engineer – Centrifugal Compressor Mechanical (Service
Engineer)

Ref. ID:  123830
Location: Port Harcourt, Rivers
Job Type: Full-time
Job Family: Customer Services
Experience Level: Experienced Professional

Position Objective

  • This position serves as a
    company technical and administrative representative, resident engineer and
    deals with customer service assignment including on-site preventive
    maintenance and inspection service work, call-out services and
    commissioning activities on centrifugal gas compressors products line and
    packages.
Mission
  • Under general direction and
    instructions, independently determines and develops approaches to
    solutions to customer requirements and problems.
  • Health, Safety and
    Environmental: Understands and complies with Siemens and customer safety
    policies and procedures. Ensure the work permit system is complied with.
    Ensure safe site and practices. Participate by attending general safety
    and toolbox safety meetings. Suggest safety improvements.
  • Quality: Ensure customer
    expectations are met or exceeded. Ensure all maintenance activities are
    carried out in accordance with company policy, manufacturer’s
    recommendations and good practices.
  • Analyzing: Must have basic
    knowledge of methods and experience in the categories of maintenance on
    the products and various equipment associated with primary package.
  • Project Monitoring: Must be
    able to recognize abnormal sounds vibrations and potential safety problems
    at inception and take appropriate action to prevent a serious safety
    hazard that could develop to equipment damage or loss of production.
    Provide timely and daily reports to the relevant manager on on-going
    projects or daily work. Keep abreast of pending work and personnel
    required to complete the projects. Ensure that necessary parts are
    available and submit materials requisitions when required.
  • Reporting: Accurate feedback
    and communication to pre-planned report format. Keep and update all
    equipment histories to effectively forecast equipment utilization and
    efficiency. Co-ordinate any changes necessary to ensure operations are
    efficient and minimal downtime is required. Ensure effective communication
    and reporting to immediate supervision and if applicable to customer
    representatives.
  • Problems: Will utilize sound
    judgment when analyzing problems. Solve problems with little or no
    supervision in a timely manner and at a nominal cost. Master all
    procedures and available options of identifying sources of information and
    technical advice. Will have enough product knowledge to repair and adjust
    minor mechanical/electrical components/systems and will be capable of
    reading applicable drawings and technical manuals.
  • Scheduling: Provide short to
    medium term scheduling of personnel and materials required for smooth
    routine maintenance and commissioning of plant.
  • Timing: Adequate strategy of
    engaging operations in releasing equipment in a timely manner for
    maintenance. Will be, required to assist in a technical manner with the
    operations and maintenance crew in any area if the workload exceeds the
    number of personnel available.
Principal
Accountabilities:
  • Monitor maintenance services or
    installation support to ensure they are carried out within company policy,
    manufacturers’ recommendations and in a safe manner
  • Ensure major interventions are
    planned, executed on schedule and within commercial orders.
Qualifications
  • Will have served on recognized
    centrifugal compressors product line and/or preferably having long period
    of continuous occupation on Dresser Rand Datum compressors as mechanical
    engineer.
  • Will possess a technical
    qualification e.g. Engineering Degree, preferably in Mechanical
    Engineering.
  • Will have 7-years and above
    working experience in a related industry. Higher experience/skill levels
    may balance lower academic qualifications, and vice versa.
  • Experience in an
    onshore/offshore environment is essential.
  • Strong rotating equipment
    background will be an asset.
  • Familiarity with gas
    compression theory, packages systems  and operation will be an asset.
  • Will hold and maintain a full
    offshore medical and survival certificate to suit all areas of assignment.
Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click
here to apply online


3. Job
Title: Field Service Engineer – Gas Turbine Controls (Service Engineer)

Ref. ID: 123826
Location: Port Harcourt, Rivers
Job Type: Full-time
Job Family: Customer Services
Experience Level: Experienced Professional

Position Objective
  • This position serves as a
    company technical and administrative representative, resident engineer and
    deals with customer service assignment including on-site preventive
    maintenance and inspection service work, call-out services and
    commissioning activities on Gas Turbines products line and packages.
Mission
  • Under general direction and
    instructions, independently determines and develops approaches to
    solutions to customer requirements and problems.
Environmental,
Health, and Safety:
  • Understands and complies with
    Siemens and customer safety policies and procedures. Ensure the work
    permit system is complied with.
  • Ensure safe site and practices.
    Participate by attending general safety and toolbox safety meetings.
    Suggest safety improvements.
Quality:
  • Ensure customer expectations
    are met or exceeded.
  • Ensure all maintenance
    activities are carried out in accordance with company policy,
    manufacturer’s recommendations and good practices.
Analyzing:
  • Must have basic knowledge of
    methods and experience in the categories of maintenance on the products
    and various equipment associated with primary package.
Project
Monitoring:
  • Must be able to recognize
    abnormal sounds vibrations and potential safety problems at inception and
    take appropriate action to prevent a serious safety hazard that could
    develop to equipment damage or loss of production.
  • Provide timely and daily
    reports to the relevant manager on on-going projects or daily work. Keep
    abreast of pending work and personnel required to complete the projects.
  • Ensure that necessary parts are
    available and submit materials requisitions when required.
Reporting:
  • Accurate feedback and
    communication to pre-planned report format.
  • Keep and update all equipment
    histories to effectively forecast equipment utilization and efficiency.
  • Co-ordinate any changes
    necessary to ensure operations are efficient and minimal downtime is
    required. Ensure effective communication and reporting to immediate
    supervision and if applicable to customer representatives.
Problems:
  • Will utilize sound judgment
    when analyzing problems. Solve problems with little or no supervision in a
    timely manner and at a nominal cost.
  • Master all procedures and
    available options of identifying sources of information and technical
    advice.
  • Will have sufficient product
    knowledge to repair and adjust minor mechanical/electrical
    components/systems and will be capable of reading applicable drawings and
    technical manuals.
Scheduling:
  • Provide short to medium term
    scheduling of personnel and materials required for smooth routine
    maintenance and commissioning of plant.
Timing:
  • Adequate strategy of engaging
    operations in releasing equipment in a timely manner for maintenance. Will
    be, required to assist in a technical manner with the operations and
    maintenance crew in any area if the workload exceeds the number of
    personnel available.
Principal
Accountabilities:
  • Monitor maintenance services or
    installation support to ensure they are carried out within company policy,
    manufacturers’ recommendations and in a safe manner
  • Ensure major interventions are
    planned, executed on schedule and within commercial orders.
Qualifications
  • Will have served on recognized
    gas turbine product lines and/or having long period of continuous
    occupation as gas turbines controls engineer.
  • Strong, Software & Hardware
    Application programing, Controls and instrument knowledge and background
    will be an asset.
  • Will possess a technical
    qualification e.g. Engineering Degree, preferably in
    Electrical/Electronics/Computer.
  • Will have over 5 years’ working
    experience in a related industry. Higher experience/skill levels may
    balance lower academic qualifications, and vice versa.
  • Experience of working at
    customers sites.
  • Familiarity with Gas Turbine
    engine theory, packages systems theory and operational will be an asset.
  • Will hold and ready to maintain
    a full offshore medical and survival certificate to suit all areas of
    assignment.
Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click
here to apply online

Leave your thoughts

Copyright

Copyright @2020. cmerije.com

Copyright @2020. cmerije.com